Tutorial: Draft Stopper + Noise Muffler=Sleep Sweeter

I love this thing. It helps me keep my sanity. 

Having two young children has taught me something: two babies awake at 2 am and howling for the attention of just one person is really not fun. The scenario is that the infant cries for milk and the toddler hears him and awakens...screaming. I decided to make a little something to keep this scenario from repeating itself every three hours until the end of time... (read that again but with a slightly frantic tone of voice). 

Don't get me wrong, there are tons of GREAT things about having two very young babies (one 2 years and one 7 weeks, to be precise), but sleep deprivation is not on my list. I'm one of those people who can't remember words when I'm short on sleep. Like last night I was trying to tell a story and couldn't remember the word...wait what was it again?...oh, yeah...werewolf. 

So I made this thing and it was really easy. It has multiple purposes--it stops drafts, blocks out noise (both while looking a little more chic and a little easier to manage than a towel stuffed under the door) and helps us all sleep a little sweeter. 

You need:

heavy-weight fusible fleece

home decor weight cotton 

   -2 rectangles

   -width= 9 inches+door thickness 

   -length=width of the doorway plus one inch

sewing machine with a sharp heavy-duty needle, thread, iron, yardstick, disappearing marker

5 lbs of rice

1) Cut out your pattern pieces. Two rectangles of home decor weight cotton using the specifications above, then back each piece with fusible fleece (leave about 1/2 inch of fabric 'unfleeced' on one short end to make it easier to stitch closed at the end.). The fleece helps make the stopper feel more sturdy, reinforcing the fabric, and it also takes up some space so you don't need quite as much rice to fill it. 

2) Pin fabric right sides together, with 1/2" seam allowance,  sew along both long sides and one short side. Turn right sides out through the open end. Now you should have something that looks like the photo below (without the two lines of stitches in the middle, that's the next step). 

3) Using the yardstick and disappearing marker, measure in 4 inches from each side seam and draw a straight line (the distance between the two lines should be approximately the thickness of your door). Using matching thread, sew along each marked line-stopping about 3/4 inch from the open end. Then you should have this:

Closed end:

Open end from top:

Leave some room so you can turn the raw edges under:

4) Sorry, I didn't photograph this next step because my hands were full of thousands of grains of rice. You could use a funnel, but I took my chances and it worked out ok. Fill each side of the stopper with rice, be sure to leave enough space for folding under and for your machine foot and don't fill the "under-the-door" part.

5) Now tuck the raw edges in, pin, and stitch across the opening--forward and back stitching securely. Trim any loose threads and slide it under the door!

I love mine! The best part is that it slides with the door, no adjusting or slipping on towels (that happened more than once in my house). They really do help block noise, I tested it. This thing is for real!

Comment if you make one and love it or if you have suggestions to make it better!

(The cute red chevron fabric came from Hobby Lobby). 

Fall

Beware, this is a picture heavy post with all kinds of fall updates! I'm trying to get ya'll filled in with details from my 5 week absence. We are enjoying Baby V, figuring out a new normal and feeling incredibly blessed!

I haven't experienced fall since 2010. In New Orleans, we enjoyed summer and spring-like weather all year long, but I have to say...I missed cool, crisp mornings and that wet, earthy smell you only get once the leaves are lying in piles on the ground. I love all the typical fall activities. Right after V was born, I took P to the apple orchard with some friends. We ate apple cider doughnuts, fed animals, drank cider slushies, slid down a slide on burlap sacks and sat on pumpkins. It was thrilling :). 

I've also had grand ideas of taking pictures of my two boys with some beautiful, fall foliage in the background. I picked a gorgeous, warm day and we tried...I took 30 pictures...this is the "good" one. 

We did get a few belly laughs out of the deal...

The leaves were beautiful at the lake this year, here's P with Papa catching his first fish. His favorite part was pushing the release button and plopping the fish back in the water then reeling it in just to start all over. 

Another iconic (at least in my childhood memory) fall thing we missed last year were woolly worms, P calls them "Squirmies" and collects them in his bike basket. 

And Halloween! Love it, just love it!

P wanted to be a monkey (an "Ooh-Ah-Ah" in his language), I picked up a costume from Old Navy. It was super warm which was perfect for the drizzly, 35 degree, trick-or-treating. V was a pumpkin. Can you get any cuter really? I made this costume and I'm going to be posting a tutorial...which I realize no one will use until next year. Maybe you want a little, baby pumpkin for Thanksgiving though? The hat is certainly fall appropriate by itself.

My Mom and I did some practice trick-or-treating with P before the big night. He went up to a bedroom door, knocked, held out his pumpkin bucket, said "Candy" and then "Thank you!"

Yes, we tried to teach him to say "trick-or-treat" but he's a very literal child. Example: most of the folks handing out candy stood outside on their porches, P walked right past them to knock on the door before backtracking to pick up a treat. I wish I had it on video.

V accompanied us, he stayed snug as a bug in his carseat, wearing his PUMPKIN HAT!!

Can't express to you how much I love this hat, it was very easy! (Tutorial to come) Please make one for Thanksgiving.

On a pumpkin sidenote, you must go to Trader Joe's and buy the Pumpkin Butter ASAP. 

Or STASAP!

"Sooner than as soon as possible." (Gilmore Girls reference for all of you GG fans). 

It is awesome, especially when you toast an english muffin, slather it with butter then add a thin layer of Pumpkin Butter. I like it so much I feel like it should have a nickname...Pum Butt (nope)...PB (already been done)...oh well. 

Come Visit...

I shared a few weeks ago that I would be guest posting for Boy, Oh Boy, Oh Boy and Melly Sews for their "Sew in Tune" series. It's been really fun to see what all these creative Mamas have come up with so far and great to get some new ideas for boy projects. If you haven't already been following, take a look! My post is going up over at Boy, Oh Boy, Oh Boy this morning! Check it out, P and I had a lot of fun with this...there may even be a super simple, summer recipe involved.

Tutorial: Tribal Print Denim Shorts

Have you seen these denim cutoffs with tribal print panels added? They're all over Pinterest.

Free People

Free People Rodeo Shorts

Cute right!? Some have a panel in the front and also a contrasting strip on the back yoke. My sister asked me to make a pair for her out of some cast off jeans so I thought I'd take some photos and share. It was a pretty quick project, here's how: 

You Need: 

Shorts (hemmed or frayed)

small pieces of fabric (cotton, knit, poly, etc... just be sure that it can take a little heat)

small pieces of Pellon "Wonder Web" (this is great stuff, it's over by the interfacing)

matching thread, scissors, iron, denim needle, stitch ripper, etc...

The Steps: 

1) Start by using a stitch ripper to remove stitches from the bottom of the belt loops (I did all of them so that I could sew them back on with black thread instead of taupe, just a time saver :)

2) Use the wonder web to create a template for each of the fabric pieces. Cut them so that they fit perfectly within the area you want to cover with fabric. We will add some allowance for hems in the next step. (You can see here I started with two separate pieces in the back but that really wasn't necessary)

3) Lay the wonder web on your fabric of choice; using it as a template, cut around the pieces adding a 1/4 " hem allowance on all sides. 

4) Head to the ironing board and pin wonder web to the wrong side of the newly cut pattern pieces. Snip corners off diagonally to reduce bulk then begin folding the fabric around the wonder web and pressing it down with a hot iron. (See photos) Avoid touching the web with your iron or you'll have a sticky mess. 

Snip wherever necessary to manipulate the fabric around the "wonder web template." The center bottom of the yoke (below) needs a snip to keep the correct angle and make a row of snips around the curve of the pocket for the front panel. 

5) When you're finished pressing, pin the pieces to the shorts. Use lots of pins and be prepared to pull and tuck so that the pieces fit correctly. (WAIT UNTIL AFTER SEWING TO PRESS, that gives you the chance to shift the fabric around and avoid weird wrinkles.)

6) Sewing with matching thread, stitch as close to the edge of the fabric as possible, smoothing as you go and keeping the belt loops out of the way.

 When you apply the front panel, finagle your way inside the pocket so that you don't stitch it closed, then sew around the outside edges.

7) After you finish stitching, press the shorts, heating wonder web and fusing the fabric even more securely to the shorts.

8) Last step! Sew the belt loops back in place. Done! A trendy, easy, upcycle!

As soon as I get one, I'll add a picture of my sis modeling these! I would have tried them on myself...but...the effect (considering my 7 month pregnant belly) wouldn't have been exactly the same :).

By the way, this fabric is a $1/yd remnant from Hancocks. It feels like rayon but is probably some other kind of cotton/poly blend because it ironed just fine. I think the light weight helped keep these shorts from feeling too bulky. 

"Tie-in'-It-Up" Tee

My blog has a new home, visit Toddler "Tie-in'-It-Up" Tee

Tutorial: Simple Button Placket

My blog has a new home. Visit to see my popular Button Placket Tutorial.

Easy Tunic Style Top Tutorial

I cannot stand to wear maternity clothes that look like all I've done is draped a tent over myself, you'd be surprised how many things look like this, especially dresses. I need some summery tops so I decided to create a simple pattern and make one. I used this beautiful, sheer, navy and white polka dot cotton/poly knit that I picked up on the Hancock's discount table several months ago ($1/yd, score!!)

Here's a snapshot of me wearing my version (without the belt, which I'm adding in this tutorial). It's cropped like that because I entered it in Made by Rae's Spring Top Week competition.




I love how it turned out, it's super easy and comfy and there are so many ways you can vary or alter the pattern to fit your body and your style.

Here's what you need: 
1) 1-2 Yards of fabric (I used something with a little stretch to accomodate the baby bump, but it would also be really pretty in a silky fabric or nice cotton)

2) Matching thread

3) measuring tape, scissors, sewing machine, etc...

How to:
1) First cut 1 rectangle:
    width=across shoulders from sleeve to sleeve plus hem
              allowance
    length=shoulder to bottom of shirt plus hem (cut on fold)

The shape of this shirt is basically a rectangle, folded in half with an opening for your head (then sewn up on the sides of course). Hold your arms straight out to your sides (like you are about to do arm circles, remember elementary school PE?) and measure from elbow to elbow across your shoulders and upper arms. If you want shorter sleeves like mine, just measure in the same way but starting and stopping where you want the sleeves to hit. Take this measurement and add 2 inches. For the length, measure from your shoulder to just below your hip (or desired length) and add 1 inch (we're going to cut on the fold so this measurement is actually half the total length of your rectangle). I did this measurement on my front so I could add in a little bust and belly room.

(At this point, I went to the ironing board and pressed all edges under 1/2" then another 1/2" and hemmed the rectangle all the way around. I didn't do anything fancy for the corners.)

2) Now we are going to cut out the neckline hole and make bias tape to finish the edge. Grab a shirt to use as a guide. I like a v-neck, but boat neck or round neck or whatever would also look good.

Start with the gentle curve of the back neckline, cut through both layers, then adjust the front until you have what you want.

Next, cut a strip of fabric (about 1 3/4" wide, I was using a 1" bias tape maker) long enough to line the edge of the neck opening. I did not cut my strip on the bias, it's up to you. Make your bias tape, then start pinning it in place, sandwiching it around the raw neck edge. I sewed the strip together at the center of the 'V' with a straight seam so I could hide it. Now, sew the bias tape to the shirt.

To form a nice 'V', pinch the bias tape with right sides together and sew along the crease, creating a little 'wedge.'

Beautiful!!

3) Now for the fit! Stand in front of a mirror (bring some pins!), put the shirt over your head and be sure the bottom edges match up perfectly (center the fold at the top of your shoulder). Matching side seams as you go, start at a comfortable spot under your arm and pin down the sides in a straight line. Pin close enough to your body to give you a flattering fit but with enough slack to get the top on and off easily. Use another pin to mark where you want the belt to go--it could be around your ribs if you're preggers or at the natural waist if you aren't. You can see in the picture below the outside line of pins is going to become my side seam and the inside yellow pin is where I want the belt.

Before you start sewing, measure to be sure left and right seams are in the same position and that the side edges are perfectly matched, then just sew in a straight line from the underarm to the hem on the right side of shirt-forward and backstitching securely. Repeat on the other side. Try on your shirt before going any further, make adjustments if needed and double check your belt position (measure and mark belt position on each side, right on the side seam).

4) For the belt, we're going to make buttonholes right on the side seams, that way the belt can be cinched in around your middle but leave the side ruffles 'ruffly.' Mine are 1 1/4" long, (about 25 mm on my machine). I did not reinforce the fabric with interfacing, if you use a really delicate fabric, make the holes just inside the side seam and use a small piece of interfacing (it will be completely hidden that way).

5) This is the last step! The Belt!! Cut a strip of fabric: Length= your waist (x2) and Width=3 1/2" Take the strip to the ironing board. Press the short ends under 1/2" and press one long edge under 1/2". Next fold the raw edge over about 1" and press, then match long pressed edges and press again. Now just sew along the ends and down the long, open side.  (ignore my horribly stained ironing board cover, clearly that should be my next project! :)

 That's it! Tie in the back or on the side, or wear without a belt. The buttonholes don't show at all if you do them in a matching color. This top was so easy, it was an hour project at most. I love something you can completely finish during one nap time...or one episode of Sesame Street. I will be making this again!

If you make this, I'd love to see comments or pictures (add them to the "You Sewed!" Flickr pool, click the tab at the top right of my homepage).